AD7995 pdf datasheet 4-Channel 10-Bit ADC with I2C Compatibl

赵城藏软件站机械电子分类下的AD7995 pdf datasheet 4-Channel 10-Bit ADC with I2C Compatibl，文件大小为232KB，适用系统为Vista, Win2003, WinXP, Win2000, NT，以下为介绍或使用方法。

The AD7991/AD7995/AD7999 are 12-/10-/8-bit, low power, successive approximation ADCs with an I²C®-compatible interface. Each part operates from a single 2.7 V to 5.5 V power supply and features a 1 μs conversion time. The track-and-hold amplifier allows each part to handle input frequencies of up to 14 MHz, and a multiplexer allows taking samples from four channels.

Each AD7991/AD7995/AD7999 provides a 2-wire serial interface compatible with I²C interfaces. The AD7991 and AD7995 come in two versions and each version has an individual I²C address. This allows two of the same devices to be connected to the same I²C bus. Both versions support standard, fast, and high speed I²C interface modes. The AD7999 comes in one version.

The AD7991/AD7995/AD7999 normally remain in a shutdown state, powering up only for conversions. The conversion process is controlled by a command mode, during which each I²C read operation initiates a conversion and returns the result over the I²C bus.

When four channels are used as analog inputs, the reference for the part is taken from V_DD; this allows the widest dynamic input range to the ADC. Therefore, the analog input range to the ADC is 0 V to V_DD. An external reference, applied through the V_IN3/V_REF input, can also be used with this part.